The following tank types are available:
- A600 – Max. content 600 litres with 80 litres of clean water
- A800 – Max. content 800 litres with 80 litres of clean water
- A1000 – Max. content 1,000 litres with 80 litres of clean water
- A1200 – Max. content 1,200 litres with 80 litres of clean water
The spray boom:
The high-quality, S355 steel boom is available in working widths from 15 to 27 meters. In consultation with CHD almost all intermediate and unusual working widths can be delivered. All boom types come in 3-fold models (4-fold optional). The outer ends are foldable simultaneously as standard (independent left and right folding is optional). There are cable trays mounted on boom sections 1.2 3, to protect and carry all cables and hoses to the correct part of the spray boom.
The entire boom is mounted on a central roller (1). A cylinder (2) provides balance adjustment, while the potentiometer (3) is responsible for the centring the balance. Two track rods (picture below) prevent machine movements being transferred to the boom.
The balancing lock is activated and deactivated by two cylinders (3). This allows the balance to move freely even in the highest position. And this allows a spray height of 2,600 mm under the spray nozzles.
The lift mast:
The lift mast comprises two S355 u-profiles. The intermediate frame (equipped with high quality steel rollers), which raises and lowers the boom, runs in these profiles. The lift cylinder, with no steel cable, provides a constant lifting speed and it has an accumulator.
The accumulator dampens movements through the vertical plane.
Hoses and cables that move with the boom are mounted protectively in an energy chain.
The hydraulic balance adjustment with automatic centring responds immediately to commands from the driver or from the DistanceControl II system (optional).
Fully folded, the Mounted sprayer can be driven on public roads, with a transport width of 2.99 meters, depending on the tire size and track width.